top of page

Accessing Alarm Messages from the Zanotti Controller

Writer's picture: Zanotti USAZanotti USA

In the event of a malfunction the unit will shut down and the in-cab controller will display an alarm message. The message will remain displayed until the malfunction is corrected.


Accessing alarm messages

Press and hold the <UP ARROW> button. The upper display will show the code of the last alarm that has occurred, the lower display indicates its number in the alarm record.


If the <UP ARROW> is further pressed the codes of the other alarms are displayed, from the most recent to the oldest one.


If there are no alarms in the archive, “noA” will be displayed.

Comments


Contact

917-584-9357

Thank You.

american flag 2.jpg
iso-9001-logo.png
ETL Listed.png
renewable energy.jpg
carb-logo-approved.png
Zanotti Green.png
NTEA Memeber.jpg
bottom of page